- Product
- Stainless Steel Sheets, Plates, Coils & Strips
- Stainless Steel Pipes and Tubes
- Stainless Steel Forged Flanges & Plate Flanges.
- Stainless Steel Forged Fittings (S/W & SCRD)
- Stainless Steel Buttweld Pipe Fitting (B/W)
- Stainless Steel Chequer Plates
- Stainless Steel Angles
- Stainless Steel SS Channels
- Stainless Steel Round Bars
- Stainless Steel Circles
Product
Stainless Steel Chequer Plates
SHRIPAD GROUP is involved in manufacturing; supplying and exporting quality assured Stainless Steel Chequer Plate. Plates are manufactured using high grade stainless steel and other components that are procured from certified vendors of the market. In order to meet the expectations of client requirement, plates are made available in different sizes, thickness and specifications and stringently checked on various parameters like superior finish and high material strength.
Topographies:
Clean and quality product with appropriate finishing.
High tensile strength & Sturdy construction.
dimensionally accurate.
| Grade | Tensile Strength Mpa, (Min) | Yield Strength Mpa, (Min) | %Age Elongation in 50mm gauge length min | Hardness (Max) | |
|---|---|---|---|---|---|
| BHN | Rb | ||||
| 301 | 515 | 205 | 40 | 217 | 95 |
| 304 | 515 | 205 | 40 | 201 | 92 |
| 304L | 485 | 170 | 40 | 201 | 92 |
| 310S | 515 | 205 | 40 | 217 | 95 |
| 316 | 515 | 205 | 40 | 217 | 95 |
| 316L | 485 | 170 | 40 | 217 | 95 |
| 317 | 515 | 205 | 35 | 217 | 95 |
| 317L | 515 | 205 | 40 | 217 | 95 |
| 321 | 515 | 205 | 40 | 217 | 95 |
| 347 | 515 | 205 | 40 | 201 | 92 |
| 409 | 380 | 170 | 20 | 179 | 88 |
| 409M | 430 | 275 | 20 | 187 | 90 |
| 410S | 415 | 205 | 22 | 183 | 89 |
| 410 | 450 | 205 | 20 | 217 | 89 |
| 420 | 700 (max) | - | 15 | 217 | 95 |
| 430 | 450 | 205 | 22 | 183 | 89 |
| JSL AUS | 515 | 205 | 40 | 217 | 95 |
| JS-203 | 515 | 205 | 40 | 217 | 95 |
| 301M | 515 | 205 | 40 | 217 | 95 |
| CHEMICAL COMPOSITION ( IN PERCENTAGE ) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Grade | C (Max) | Mn (Max) | P (Max) | S (Max) | Si (Max) | Cr | Ni | Mo | Nitrogen (Max) | Cu / Others |
| 301 | 0.15 | 2 | 0.045 | 0.03 | 1 | 16.00-18.00 | 6.00-8.00 | - | 0.1 | - |
| 304 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 18.00-20.00 | 8.00-10.50 | - | 0.1 | - |
| 304L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 18.00-20.00 | 8.00-12.00 | - | 0.1 | - |
| 310S | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24.00-26.00 | 19.00-22.00 | - | - | - |
| 316 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | 0.1 | - |
| 316L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | 0.1 | - |
| 317 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 18.00-20.00 | 11.00-14.00 | 3.00-4.00 | 0.1 | - |
| 317L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | 0.1 | - |
| 321 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00-19.00 | 9.00-12.00 | - | 0.1 | Ti5 ( C + N ) Min or 0.70 max |
| 347 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00-19.00 | 9.00-13.00 | - | - | Cb= 10x ( C Min ) or 1.00 Max |
| 409 | 0.08 | 1 | 0.04 | 0.01 | 1 | 10.50-11.75 | 0.5 | - | - | Ti= 6x (C+ N ) Min or 0.70 Max |
| 409M | 0.03 | 0.81.2 | 0.03 | 0.03 | 0.40.75 | 11.00-12.00 | 1.5 max | - | - | Ti= 6x (C) Min or 0.70 Max |
| 410S | 0.08 | 1 | 0.04 | 0.03 | 1 | 1.50-13.50 | 0.6 | - | - | - |
| 410 | 0.15 | 1 | 0.04 | 0.03 | 1 | 11.50-13.50 | 0.75 | - | - | - |
| 420 | 0.35 | 0.5 | 0.035 | 0.015 | 0.5 | 12.00-13.00 | 0.20.3 | - | - | - |
| 430 | 0.12 | 1 | 0.04 | 0.03 | 1 | 16.00-18.00 | 0.75 | - | - | - |
| JSL AUS | 0.08 | 7.08.0 | 0.07 | 0.03 | 0.75 | 15.50-16.50 | 4.25-4.75 | - | - | 0.9-1.10 |
| JS-203 | 0.08 | 9.2510.25 | 0.07 | 0.03 | 0.75 | 14.25-15.25 | 2.25-2.75 | - | - | 1.60-2.0 |
| 301M | 0.1 | 4.55.5 | 0.06 | 0.03 | 0.75 | 14.50-15.50 | 6.0-7.0 | - | - | 1.70-1.90 |
| * Thickness of 1.27mm & below will have elongation of 20% min. |
-
Mail id : kptechnosys@gmail.com
Call Now : 9011 614 901